This entry was posted by admin on 19/02/2010 at 4:26 am, and is filled under Uncategorized. Follow any responses to this post through RSS 2.0. You can leave a response or trackback from your own site.
Hi.. can anyone let me knw how to buy an ecigeratte.. i wanted to buy one… tel me more abt it.. its price, does it give u the pleasure of cigeratte???????
VAPING TIPS – BETTER PERFORMANCE/LIFESPAN
———————————-
There are a couple of things that you can do to get the best performance/life-span from your Atomizer
1. Method of Use – Do not hold the button for down too long (manual battery) or suck for too long (automatic battery), in order to prevent the Atomizer getting too hot.
2. Do not let the Atty overheat – If it is too hot to put comfortably against your lip, you should give a rest between puffs.
3. Ensure that the Atomizer always has sufficient liquid on it. (ensure that you always have sufficient liquid in your cart).
4. Alignment – Try to always position the Cart inline with the wick on the Atomizer (match the shape of the Atty to align to the same shape of the material in the Inner Cartridge).
ATOMIZER CLEANING – MAINTAINENCE
————————————
1. Pour a shotglass full of hydrogen peroxide (HP). (Completely filled a small plastic rubbermaid container with a sealable lid) – Use gloves
2. Blow out any materials in the Atty (can of compressed air designed for use with cleaning electronic devices), and place in peroxide bath.
3. Let soak overnight. (Let it soak for at least 15-30 minutes). Give the mixture a gentle shake every once in a while.
4. Remove the Atty from the peroxide bath, and soak in boiling water for 10 min.
5. Blow out all water from the Atty (can of compressed air designed for use with cleaning electronic devices)
6. Let dry for 24-48 hours. (Can use a hair dryer to speed up process)
7. After drying – drip 2-3 drops of juice (crystal liquid… of course…) onto the bridge of the Atty.
8. You are good to go!
GENERAL TIPS & MAINTAINENCE
—————————————
Always disconnect your e-cigz Battery from the Atomizer when not in use.
Keep up a good habit of daily wiping down all components of your e-cigz from excess juice, dust and dirt.
Clean your Carts and Atty everytime you refill.
Never activate your e-cigz Battery and Atomizer for long extended periods of time. Keep the Atomizer from over-heating and it will perfrom better, and last longer.
Never keep vaping on a dry Atomizer.
BATTERY SAFETY
————————————-
Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled.
User should have enough knowledge of Li-ion rechargeable batteries in charging, discharging and assembly before use.
Always charge in/on a fire-proof surface.
Never leave charging batteries unattended.
Never continue to use an e-cigarette type device if you can feel the battery get hot. If your battery gets hot to the touch, or if it begins smelling: DO NOT USE IT ANYMORE. Let it cool down (1 hour) in a safe environment (outside preferably), and then dispose of correctly, or make arrangements to return, if still under warranty.
If your e-cigarette or device begins activating itself, immediately remove your atomiser and disconnect the battery. Do NOT trust the battery, nor the atomiser anymore from this point on. This means never leave either of the components connected in your pocket, in your nightstand, or out of visibility where you can not immediately separate the two components.
Read the information found at: http://www.batteryuniversity.com before purchasing. It is important to carry batteries properly, charge properly, and dispose of properly.
1. Never clean atomizers with anything foreign to the atomizer. In other words, If it’s not e-juice or PG, then don’t put it in the atty!
2. Under no circumstances should you ever let your atty go dry. You do NOT drain them. You can flush them with e-juice or PG, but never drain them dry.
3. Never restuff carts with anything foreign to the cart. You should only use 100% premium polyester fiberfill that doesn’t have any flame retardants added to it. If you can’t find that, or have trouble making handmade filler with it, then your second choice should be the Fluval Polyester Aquarium Filter Pads (they are easier to handle). Basically, if the filler is not white, not made of polyester, and has flame retardants in it, then DON’T put it in the cart. And, always replace the filler after the 5th refill has been used. Trust me on that. You can thank me later.
4. Never put plastic straws in the carts. Since you don’t know exactly which type of plasticizer process is being used to make it, they need to stay as far away from e-liquid as possible. Not because of health concerns, but because different plastics react differently to heat and e-liquid. E-liquid can easily strip the first few layers off the plastic straw and into the coil. While you’re vaping the fumes it’s also corroding the coil. It took me 2 quick dying attys to realize what was going on. I soon learned how to correctly stuff my cart without using a straw. Practice makes perfect.
5. Never pull out the wick fibers from the coil unless you’re absolutely sure the atty is about to die. When the atty seems “dead” but still heats up, then, and only then, should you pull out the wick fibers from the coil. This will restore the atty and give you plenty of time to order more atty’s.
On a side note, however, if you want to pull the supplemental wick fibers found on some 510 bridges that can cause excessive clogging due to using VG-based liquids, that’s okay. BUT, you have to do it before you fire up the atty the first time. I found that out the hard way when I first stumbled upon the new 510 breeds. If you’re using mostly a PG-based, or 20% Reduced PG liquid, then this is not that big of an issue. But remember when it comes to restoring an atty later, those extra fibers will just get in the way. You’ll just have to weigh the good with the bad and make a personal preference of your own. My biggest concern about them is their effects on air flow and atty life, so I pull those ‘wick’ed b@st@rds!
6. Lithium Ion batteries don’t suffer from a “memory effect” under reasonable usage limits, BUT high drain usages (such as atomizers) can and will weaken the battery sooner than you might expect (some worse than others, depends on who makes them). As they loose their amperage capacity you will notice your e-cig doesn’t give such a great vape anymore. This is because the protection circuit is not identifying the threshold limits correctly. It’s NOT that they don’t need an occasional refresh, it’s should be stated you can’t refresh Li-Ion batteries that have a built-in safety protection circuit. And, because of this, a charger has difficulty giving the Li-Ion battery a full recharge. Then when you try to use the battery you notice your atty kills it much faster and way before you ever reach the 300th cycle the battery is suppose to be good for. I’ve seen battery charge deterioration near cycle 40! – This is why you should invest in 2 other items… 1) a third party Li-Ion charger you can ONLY plug into a wall outlet, and 2) a passthru power supply you can plug into a wall outlet so you can give your batteries a break. To get a power supply without having to mod your own, simply combine a USB passthru device with a 5v 2 amp (2000 mah) USB power supply. – One more thing about e-cig batteries… don’t settle for automatic batteries alone. Always get a few manual push button batteries too! You get more precise control with them and you can get more charge cycles out of them. How is that so?… It’s because you can “refresh” (more like a reset) the battery using the LED and push button. I might need to explain this a little more… Okay, here it goes, let’s say you noticed a significant performance hit on the manual battery and it’s dying too soon. The protection circuit disables the battery and you can’t activate the LED anymore unless you recharge it, so you can’t do any resetting, right?… WRONG!… All you have to do is reinitialize the protection circuit and run a low power drain. Connect the battery to your charger, let the LED blink, then immediately disconnect the battery. Wait 3 seconds and notice you can now press the button and make the LED light up again. DO NOT connect an atty to the battery and try to use it, that will only cause the protection circuit to disable the battery again. What you do is take a piece of scotch tape and wrap it around the battery tightly so the tape will push the button in. Watch as the LED lights up for a few seconds (10 seconds on my 510 bat), then fades, then immediately lights up again. The battery will continue to run this cycle until the low power drain is complete and then blinks at the TRUE low volt threshold limit the battery is fully capable of. When the light is completely out (could take over an hour), take off the tape and connect the battery to your best charger. 4 hours later check your battery and make sure it’s fully charged (usually a solid green light, might have a quick 1/4 of a second burst of red on some chargers, but it is charged). You have now recalibrated the protection circuit and the battery is ready to use. The battery will last longer this time. You should do the reset again after the next 20 to 25 regular charge/discharge cycles and thereafter until the life of the battery is completely exhausted… So the next time someone asks, “Can you really get 300+ cycles out of a 510 e-cig battery?”, you can say, “Yep, with a manual battery you can.”
7. Many poor vaping experiences are caused by poorly manufactured e-juice. The worst of the worst is VG based liquids that don’t have any PG in them. If you’re one of the unlucky ones that can’t use PG due to strange allergic reactions (which I still doubt has any truth to it), then I’m sorry for your loss. You’ll just have to experiment with other recipes and find one that doesn’t destroy your atty. If you’re an ultra-light to light vaper, then you might want to try a KR808-D1. They use quick disposable cartomizers and you can refill them up to 5 times, if you want to. VG based liquids work fine in those because the coil is made of cheaper material and you’re going to throw them away more often anyway, so it doesn’t really matter. Automatic batteries work best with the KR808. You can make manual battery adapter mods work with them, but the air flow sucks even worse when you do that.
Anyway, back to e-juice… PG is the magic solution that keeps an atty going strong. It cleans, it conditions, has a thinner composition, generates fog like an e-cig was designed to do, and doesn’t invade other peoples airspace in a restaurant. The closest I ever go to VG is when it’s being used to slightly sweeten a recipe (1% or less). I hate VG! It smells like burnt grease and gums up my attys. I would rather use straight glycerol than the VG version. The only true benefit VG has is it’s cheaper for the garage chemist to use so he can make a higher profit. And I’ve noticed this little “VG is better and safer to use” crap has taken off like a rocket, it’s just a gimmick to get your extra bucks, plus it kills your atty so you’ll have to buy more of them more often. So, with all that in mind, it’s best to get premium grade e-liquid from a reputable business that offers both PG and RPG formulas, are FDA registered, and really cares about safety. They present their products with professional packaging. When you taste the liquid you should be able to taste the pride and integrity in there too. They will post all of their ingredients and work hard to serve you. Yes, it will cost more, but it will be worth every penny of it. Find those people and you’ll have a winner!
Clean contacts often. Every time I change a battery, I wipe down the contacts with a napkin. Once a month I’ll use contact cleaner. Occasionally put the napkin between the battery and the atty and screw them together to get any gunk off the threads in the battery.
Pretty nice post. I just stumbled upon your blog and wanted to say that I have really enjoyed browsing your blog posts. In any case I’ll be subscribing to your feed and I hope you write again soon!
I like reading your site for the reason that you can always bring us fresh and cool stuff, I think that I must at least say a thank you for your hard work.
Beneficial info and excellent design you got here! I want to thank you for sharing your ideas and putting the time into the stuff you publish! Great work!
every day morning, I remove the cotton from the cartridge carefully with a tweezer and put it on a facial tissue paper and using the paper slightly press the cotton making sure that it doesnt change its shape. then i blow through the atomizer part and the part where the cotton is held, a couple of times to remove residual liquid / water,
then assemble it back.
i also find water forming in the joint of the cartridge where it mates with the atomizer after few puffs thus reducing the vapour, so whenever u find vapour reducing, then just remove the cartridge and wipe it with tissue paper and put back, then the vapour delivery increases immediately.
Just now when i put an insulation tape around the joint between atomizer and cartridge, found that the water problem is kind of solved for time being, will let u know the development, shows that air shud not leak here
A powerful share, I just given this onto a colleague who was doing a bit of evaluation on this. And he in fact purchased me breakfast because I discovered it for him.. smile. So let me reword that: Thnx for the treat! But yeah Thnkx for spending the time to debate this, I really feel strongly about it and love reading extra on this topic. If possible, as you become expertise, would you thoughts updating your weblog with more particulars? It’s highly helpful for me. Massive thumb up for this blog put up!
Hi. I like your website but i can tell it probably isn’t getting much traffic? If you want to help imrpove that check this website out, he has a short video that i really suggest you watch. Commission Crusher P.S this isn’t my website and i’m not spamming your blog, i don’t care if you delete this comment. I am only trying to help you improve your site.
It was a pleasure finding your site last night. I came here this day hoping to uncover something new. And I was not frustrated. Your ideas for new strategies on this area were topical and a terrific help to me personally. Thank you for creating time to write out these things along with sharing your notions.
Amazing! Your post has a ton comments. How did you get so many viewers to look at your site I’m very jealous! I’m still getting to know all about posting information on the net. I’m going to look around on your website to get a better understanding how to attract more people. Thanks!
excellent post, very informative. I wonder why the other specialists of this sector do not notice this. You should continue your writing. I am confident, you’ve a huge readers’ base already!
about 1 year ago
Hi.. can anyone let me knw how to buy an ecigeratte.. i wanted to buy one… tel me more abt it.. its price, does it give u the pleasure of cigeratte???????
about 1 year ago
to buy ecigarettes call at 9811444399. ayush jain. delhi
about 1 year ago
WHILE NOT IN USE,KEEP YOUR E CIGRT IN THE CATRIDGE DOWN POSITION…..IT WILL IMPROVE ITS EFFICIENCY AN REDUCE THE WASTING OF E-LIQUID…
about 1 year ago
VAPING TIPS – BETTER PERFORMANCE/LIFESPAN
———————————-
There are a couple of things that you can do to get the best performance/life-span from your Atomizer
1. Method of Use – Do not hold the button for down too long (manual battery) or suck for too long (automatic battery), in order to prevent the Atomizer getting too hot.
2. Do not let the Atty overheat – If it is too hot to put comfortably against your lip, you should give a rest between puffs.
3. Ensure that the Atomizer always has sufficient liquid on it. (ensure that you always have sufficient liquid in your cart).
4. Alignment – Try to always position the Cart inline with the wick on the Atomizer (match the shape of the Atty to align to the same shape of the material in the Inner Cartridge).
ATOMIZER CLEANING – MAINTAINENCE
————————————
1. Pour a shotglass full of hydrogen peroxide (HP). (Completely filled a small plastic rubbermaid container with a sealable lid) – Use gloves
2. Blow out any materials in the Atty (can of compressed air designed for use with cleaning electronic devices), and place in peroxide bath.
3. Let soak overnight. (Let it soak for at least 15-30 minutes). Give the mixture a gentle shake every once in a while.
4. Remove the Atty from the peroxide bath, and soak in boiling water for 10 min.
5. Blow out all water from the Atty (can of compressed air designed for use with cleaning electronic devices)
6. Let dry for 24-48 hours. (Can use a hair dryer to speed up process)
7. After drying – drip 2-3 drops of juice (crystal liquid… of course…) onto the bridge of the Atty.
8. You are good to go!
GENERAL TIPS & MAINTAINENCE
—————————————
Always disconnect your e-cigz Battery from the Atomizer when not in use.
Keep up a good habit of daily wiping down all components of your e-cigz from excess juice, dust and dirt.
Clean your Carts and Atty everytime you refill.
Never activate your e-cigz Battery and Atomizer for long extended periods of time. Keep the Atomizer from over-heating and it will perfrom better, and last longer.
Never keep vaping on a dry Atomizer.
BATTERY SAFETY
————————————-
Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled.
User should have enough knowledge of Li-ion rechargeable batteries in charging, discharging and assembly before use.
Always charge in/on a fire-proof surface.
Never leave charging batteries unattended.
Never continue to use an e-cigarette type device if you can feel the battery get hot. If your battery gets hot to the touch, or if it begins smelling: DO NOT USE IT ANYMORE. Let it cool down (1 hour) in a safe environment (outside preferably), and then dispose of correctly, or make arrangements to return, if still under warranty.
If your e-cigarette or device begins activating itself, immediately remove your atomiser and disconnect the battery. Do NOT trust the battery, nor the atomiser anymore from this point on. This means never leave either of the components connected in your pocket, in your nightstand, or out of visibility where you can not immediately separate the two components.
Read the information found at: http://www.batteryuniversity.com before purchasing. It is important to carry batteries properly, charge properly, and dispose of properly.
about 1 year ago
1. Never clean atomizers with anything foreign to the atomizer. In other words, If it’s not e-juice or PG, then don’t put it in the atty!
2. Under no circumstances should you ever let your atty go dry. You do NOT drain them. You can flush them with e-juice or PG, but never drain them dry.
3. Never restuff carts with anything foreign to the cart. You should only use 100% premium polyester fiberfill that doesn’t have any flame retardants added to it. If you can’t find that, or have trouble making handmade filler with it, then your second choice should be the Fluval Polyester Aquarium Filter Pads (they are easier to handle). Basically, if the filler is not white, not made of polyester, and has flame retardants in it, then DON’T put it in the cart. And, always replace the filler after the 5th refill has been used. Trust me on that. You can thank me later.
4. Never put plastic straws in the carts. Since you don’t know exactly which type of plasticizer process is being used to make it, they need to stay as far away from e-liquid as possible. Not because of health concerns, but because different plastics react differently to heat and e-liquid. E-liquid can easily strip the first few layers off the plastic straw and into the coil. While you’re vaping the fumes it’s also corroding the coil. It took me 2 quick dying attys to realize what was going on. I soon learned how to correctly stuff my cart without using a straw. Practice makes perfect.
5. Never pull out the wick fibers from the coil unless you’re absolutely sure the atty is about to die. When the atty seems “dead” but still heats up, then, and only then, should you pull out the wick fibers from the coil. This will restore the atty and give you plenty of time to order more atty’s.
On a side note, however, if you want to pull the supplemental wick fibers found on some 510 bridges that can cause excessive clogging due to using VG-based liquids, that’s okay. BUT, you have to do it before you fire up the atty the first time. I found that out the hard way when I first stumbled upon the new 510 breeds. If you’re using mostly a PG-based, or 20% Reduced PG liquid, then this is not that big of an issue. But remember when it comes to restoring an atty later, those extra fibers will just get in the way. You’ll just have to weigh the good with the bad and make a personal preference of your own. My biggest concern about them is their effects on air flow and atty life, so I pull those ‘wick’ed b@st@rds!
6. Lithium Ion batteries don’t suffer from a “memory effect” under reasonable usage limits, BUT high drain usages (such as atomizers) can and will weaken the battery sooner than you might expect (some worse than others, depends on who makes them). As they loose their amperage capacity you will notice your e-cig doesn’t give such a great vape anymore. This is because the protection circuit is not identifying the threshold limits correctly. It’s NOT that they don’t need an occasional refresh, it’s should be stated you can’t refresh Li-Ion batteries that have a built-in safety protection circuit. And, because of this, a charger has difficulty giving the Li-Ion battery a full recharge. Then when you try to use the battery you notice your atty kills it much faster and way before you ever reach the 300th cycle the battery is suppose to be good for. I’ve seen battery charge deterioration near cycle 40! – This is why you should invest in 2 other items… 1) a third party Li-Ion charger you can ONLY plug into a wall outlet, and 2) a passthru power supply you can plug into a wall outlet so you can give your batteries a break. To get a power supply without having to mod your own, simply combine a USB passthru device with a 5v 2 amp (2000 mah) USB power supply. – One more thing about e-cig batteries… don’t settle for automatic batteries alone. Always get a few manual push button batteries too! You get more precise control with them and you can get more charge cycles out of them. How is that so?… It’s because you can “refresh” (more like a reset) the battery using the LED and push button. I might need to explain this a little more… Okay, here it goes, let’s say you noticed a significant performance hit on the manual battery and it’s dying too soon. The protection circuit disables the battery and you can’t activate the LED anymore unless you recharge it, so you can’t do any resetting, right?… WRONG!… All you have to do is reinitialize the protection circuit and run a low power drain. Connect the battery to your charger, let the LED blink, then immediately disconnect the battery. Wait 3 seconds and notice you can now press the button and make the LED light up again. DO NOT connect an atty to the battery and try to use it, that will only cause the protection circuit to disable the battery again. What you do is take a piece of scotch tape and wrap it around the battery tightly so the tape will push the button in. Watch as the LED lights up for a few seconds (10 seconds on my 510 bat), then fades, then immediately lights up again. The battery will continue to run this cycle until the low power drain is complete and then blinks at the TRUE low volt threshold limit the battery is fully capable of. When the light is completely out (could take over an hour), take off the tape and connect the battery to your best charger. 4 hours later check your battery and make sure it’s fully charged (usually a solid green light, might have a quick 1/4 of a second burst of red on some chargers, but it is charged). You have now recalibrated the protection circuit and the battery is ready to use. The battery will last longer this time. You should do the reset again after the next 20 to 25 regular charge/discharge cycles and thereafter until the life of the battery is completely exhausted… So the next time someone asks, “Can you really get 300+ cycles out of a 510 e-cig battery?”, you can say, “Yep, with a manual battery you can.”
7. Many poor vaping experiences are caused by poorly manufactured e-juice. The worst of the worst is VG based liquids that don’t have any PG in them. If you’re one of the unlucky ones that can’t use PG due to strange allergic reactions (which I still doubt has any truth to it), then I’m sorry for your loss. You’ll just have to experiment with other recipes and find one that doesn’t destroy your atty. If you’re an ultra-light to light vaper, then you might want to try a KR808-D1. They use quick disposable cartomizers and you can refill them up to 5 times, if you want to. VG based liquids work fine in those because the coil is made of cheaper material and you’re going to throw them away more often anyway, so it doesn’t really matter. Automatic batteries work best with the KR808. You can make manual battery adapter mods work with them, but the air flow sucks even worse when you do that.
Anyway, back to e-juice… PG is the magic solution that keeps an atty going strong. It cleans, it conditions, has a thinner composition, generates fog like an e-cig was designed to do, and doesn’t invade other peoples airspace in a restaurant. The closest I ever go to VG is when it’s being used to slightly sweeten a recipe (1% or less). I hate VG! It smells like burnt grease and gums up my attys. I would rather use straight glycerol than the VG version. The only true benefit VG has is it’s cheaper for the garage chemist to use so he can make a higher profit. And I’ve noticed this little “VG is better and safer to use” crap has taken off like a rocket, it’s just a gimmick to get your extra bucks, plus it kills your atty so you’ll have to buy more of them more often. So, with all that in mind, it’s best to get premium grade e-liquid from a reputable business that offers both PG and RPG formulas, are FDA registered, and really cares about safety. They present their products with professional packaging. When you taste the liquid you should be able to taste the pride and integrity in there too. They will post all of their ingredients and work hard to serve you. Yes, it will cost more, but it will be worth every penny of it. Find those people and you’ll have a winner!
about 1 year ago
The cleaning routine:
Clean contacts often. Every time I change a battery, I wipe down the contacts with a napkin. Once a month I’ll use contact cleaner. Occasionally put the napkin between the battery and the atty and screw them together to get any gunk off the threads in the battery.
Weekly blow out the atomizer
about 1 year ago
make your pffs shorter….baterry will last for a longer period….
about 1 year ago
Pretty nice post. I just stumbled upon your blog and wanted to say that I have really enjoyed browsing your blog posts. In any case I’ll be subscribing to your feed and I hope you write again soon!
about 1 year ago
i want it
about 1 year ago
hello are you really wanting electronic cigarettes or is it a spam?
about 1 year ago
who are you?
about 1 year ago
I like reading your site for the reason that you can always bring us fresh and cool stuff, I think that I must at least say a thank you for your hard work.
- Henry
about 1 year ago
Beneficial info and excellent design you got here! I want to thank you for sharing your ideas and putting the time into the stuff you publish! Great work!
about 1 year ago
thank you !!! are you also using any electronic cigarette model?
about 1 year ago
one can argue that it can go both ways
about 1 year ago
makes me want to drink alchoholic beverages
about 1 year ago
Hi All,
This is the way I maintain my e-sig.
every day morning, I remove the cotton from the cartridge carefully with a tweezer and put it on a facial tissue paper and using the paper slightly press the cotton making sure that it doesnt change its shape. then i blow through the atomizer part and the part where the cotton is held, a couple of times to remove residual liquid / water,
then assemble it back.
i also find water forming in the joint of the cartridge where it mates with the atomizer after few puffs thus reducing the vapour, so whenever u find vapour reducing, then just remove the cartridge and wipe it with tissue paper and put back, then the vapour delivery increases immediately.
hope u all find my method useful.
regards
vinod k. iyer
about 1 year ago
Hi all,
Just now when i put an insulation tape around the joint between atomizer and cartridge, found that the water problem is kind of solved for time being, will let u know the development, shows that air shud not leak here
regards vinod k. iyer
about 1 year ago
thank you
about 1 year ago
Great Post. I have read many posts on this subject and you have written about it the best. Keep it up!
about 11 months ago
There’s noticeably a bundle to find out about this. I assume you made sure good factors in options also.
about 11 months ago
A powerful share, I just given this onto a colleague who was doing a bit of evaluation on this. And he in fact purchased me breakfast because I discovered it for him.. smile. So let me reword that: Thnx for the treat! But yeah Thnkx for spending the time to debate this, I really feel strongly about it and love reading extra on this topic. If possible, as you become expertise, would you thoughts updating your weblog with more particulars? It’s highly helpful for me. Massive thumb up for this blog put up!
about 11 months ago
Hi. I like your website but i can tell it probably isn’t getting much traffic? If you want to help imrpove that check this website out, he has a short video that i really suggest you watch. Commission Crusher P.S this isn’t my website and i’m not spamming your blog, i don’t care if you delete this comment. I am only trying to help you improve your site.
about 11 months ago
i bookmarked this! looking for updates…
about 11 months ago
It was a pleasure finding your site last night. I came here this day hoping to uncover something new. And I was not frustrated. Your ideas for new strategies on this area were topical and a terrific help to me personally. Thank you for creating time to write out these things along with sharing your notions.
about 11 months ago
Outstanding post, you have pointed out some superb details , I besides think this s a very wonderful website.
about 10 months ago
Awesome website you have here by the way
about 10 months ago
Amazing! Your post has a ton comments. How did you get so many viewers to look at your site I’m very jealous! I’m still getting to know all about posting information on the net. I’m going to look around on your website to get a better understanding how to attract more people. Thanks!
about 4 months ago
Also you can set the chatbox against your blog site for further interaction between visitors.
about 4 months ago
excellent post, very informative. I wonder why the other specialists of this sector do not notice this. You should continue your writing. I am confident, you’ve a huge readers’ base already!